|
Designed for LED lighting applications
Universal AC input (100~305Vac)
Built-in active PFC provide PF>=0.90,THD>=20%, over entire input range
Class 2 power supply(note model details)
Plastic case cooled by air convection
Protections: Short circuit / Over voltage / Over Current / Over temperature
Dimmable output with flexible architecture
? DC Dimming (0-10V) (Electrically isolated 0-10V dimming input)
? Phase cut dimming(Triac,ELV,etc.)
5 year warranty (Long life at high ambient temperatures)
產品參數：
Constant Current Variants
|
Part Number |
Output Current (mA) |
Output Voltage |
Load Reg. |
Max. Effic. |
Max. Output Power (W) |
||||
|
XEL-A030D-024-C1X25 |
1250 |
16 ~ 24 |
±5% |
TBD |
30 |
||||
|
XEL-A030D-042-C0X90 |
900 |
20 ~ 33 |
±5% |
TBD |
30 |
||||
|
XEL-A030D-042-C0X70 |
700 |
25 ~ 38 |
±5% |
TBD |
27 |
||||
|
XEL-A030D-042-C0X60 |
600 |
30 ~ 42 |
±5% |
TBD |
26 |
||||
|
XEL-A030D-056-C0X54 |
540 |
36 ~ 48 |
±5% |
TBD |
26 |
||||
|
XEL-A030D-056-C0X45 |
450 |
40 ~ 56 |
±5% |
TBD |
25 |
||||
|
XEL-A030D-056-C0X315 |
315 |
40 ~ 56 |
±5% |
TBD |
18 |
||||
General Specification
|
SERIES |
XEL-A030D |
|
|
OUTPUT |
DC VOLTAGE RANGE |
16~56Vdc (see orderable parts table for details) |
|
RATED CURRENT RANGE |
315mA ~ 1400mA (see orderable parts table for details) |
|
|
RATED POWER |
up to 30W |
|
|
LOAD REGULATION1 |
±5% |
|
|
TURN ON TIME |
10% < 500ms;30% < 1s;50% <2s;100% < 5s; |
|
|
INPUT |
VOLTAGE RANGE |
100 ~ 305Vac |
|
FREQUENCY RANGE |
The input frequency range will be 47 to 63 Hz. |
|
|
POWER FACTOR (Typ.) |
PFC >0.90 at rated current and over rated voltage range from 120-277VAC |
|
|
EFFICIENCY (Typ.) |
TBD |
|
|
AC CURRENT |
0.4A max @ 120Vac and 277Vac |
|
|
INRUSH CURRENT (Typ.) |
<30A@25℃，230Vac cold start |
|
|
LEAKAGE CURRENT |
<500μA (400μA typical) |
|
|
THD (TOTAL HARMONIC DIST.) |
Compliance to EN61000-3-2 Class C Standards, THD ≤ 20% with DC output at full load and nominal input voltages. |
|
|
DIMMING |
MODES |
DC Dimming Control: 0-10 Vdc |
|
PROTECTION |
SHORT CIRCUIT |
Hiccup mode protection. Recovers automatically after fault condition is removed |
|
OVER VOLTAGE |
< 30% above the maximum output voltage listed for the specific part number |
|
|
OVER CURRENT |
< 30% above the maximum output current listed for the specific part number |
|
|
OVER TEMPERATURE |
If temperature at Tc (the surface temperature of the case )is >90°C, the light should automatically dim to 5%- 15% light output. Then if the temperature drops below 80°C-50°C, the unit should go back to 100% automatically. |
|
|
ENVIRONMENT |
WORKING TEMPERATURE (Typ.) |
-40°C ~ +70°C ambient (Tcase rated for 90C) |
|
WORKING HUMIDITY |
5% ~ 95% RH non-condensing |
|
|
STORAGE TEMPERATURE |
-40°C ~ + 85°C |
|
|
STORAGE HUMIDITY |
5% ~ 95% RH non-condensing |
|
|
Waterproof Rating |
TBD |
|
|
IMPACT RESISTANCE |
1 g/s |
|
|
VIBRATION |
5-55Hz/2g, 30 minutes |
|
|
SAFETY & EMC |
SAFETY STANDARDS |
UL8750, CAN/CSA-C22.2 No. 250.13-12 ,Class 2 power supply |
|
EMI CONDUCTION & RADIATION |
Compliance FCC Part 15 Class B and EN55015 Compliant |
|
|
HARMONIC CURRENT |
Compliance to GB4343-2003+A1, CISPR 14-1:EN61000-3-2:1995 |
|
|
EMS IMMUNITY |
Compliance to GB/T13926.3, IEC61000-4-3 & 4-4, PrEN55014-2 Section 6.2 & 6.5, IEC61000-4-11. |
|
|
TRANSIENT SUPPRESSION |
IEC61000-4-5 LEVEL 4 (2KV/1KA L-L) |
|
|
OTHERS |
LIFETIME |
50,000 hours @ Tcase ≤ 90C |
PDF文件下載：
| 30W LED驅動電源 | PDF文件下載 |
|---|---|
| XEL-A030D | 點擊下載 |
推薦產品：
